Set Utilization Cpu - Avaya G250 Reference

Context
You must be in the survivable-call-engine context before the set trunk-group command will
work.
Example
G250-001(super-survivable-call-engine)# set trunk-group 13 dtmf 9139
loop-start
Trunk Group: 13
Dial: dtmf
Tac: 9139
Type: loop-start
Related commands
add trunk-group,
trunk-group, remove
extension, set extension-password,
survivable-call-engine,
show ip-codec-set,
survivable-call-engine,

set utilization cpu

Use the set utilization cpu command to enable CPU utilization measurements.
Syntax
set utilization cpu module
Parameters
Parameter
module
User level
read-write
Context
general
clear ars-fac, clear survivable-config,
trunk-group, save
set
show ars-fac, show
show last-pim-update,
show trunk-group,
Description
Number of the module
Alphabetical listing of CLI commands
clear dial-pattern,
config, set ars-fac, set
ip-codec-set, set max-ip-registrations,
date-format, show
show max-ip-registrations,
survivable-call-engine
clear extension,
date-format, set dial-pattern,
set
dial-pattern, show extension,
show
Possible Default
Values Value
Issue 1.1 June 2005
clear
set
507