Bandwidth - Avaya G250 Reference

CLI Commands
Example
To specify that Serial interface 2/1:1 is a backup interface for the current interface:
G350-001(if:Serial 2/1:2)# backup interface Serial 2/1:1
Related commands
backup delay

bandwidth

Use the bandwidth command to set the bandwidth parameter manually for this interface. Use
the no form of this command to restore the bandwidth parameter to its default value. The
manually specified bandwidth value overrides the dynamically calculated bandwidth during
route cost calculations.
Syntax
bandwidth kilobits
no bandwidth
Parameters
Parameter
kilobits
User level
read-write
Context
Interface: Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, DS1 FR-SUB L2,
DS1 FR-SUB L2-L3, USP PPP L2, USP PPP L2-L3, USP FR L2), Fast Ethernet (L2, L2-L3),
VLAN (L2, L2-L3), Loopback (L2, L2-L3), Tunnel (L2, L2-L3)
Example
To manually set the bandwidth for the VLAN interface to 100 KB/s:
G350-001(if:Vlan 1)# bandwidth 100
48 Avaya G250 and Avaya G350 CLI Reference
Description
The bandwidth for the interface in kilobits
per second
Possible Default
Values Value
1-10000000 2048
(for
Frame
Relay)