Set Spantree Max-Age - Avaya G250 Reference

set spantree max-age

Use the set spantree max-age command to specify the time to keep an information
message before it is discarded.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree max-age seconds
Parameters
Parameter
seconds
User level
read-write
Context
general
Example
To keep information messages for 20 seconds before discarding:
G350-001(super)# set spantree max-age 20
bridge max age is set to 20.
Related commands
set port spantree,
spantree priority,
forward-delay,
spantree version,
Description
The value must be between
2 * (Bridge-hello-time + 1) and
2 * (Bridge-forward-delay - 1). The
recommended value is 20
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
show spantree
Alphabetical listing of CLI commands
set port spantree force-protocol-migration,
set spantree
set spantree priority, set spantree
Possible Default
Values Value
6-40
enable/disable, set spantree
tx-hold-count,
Issue 1.1 June 2005
set port
set
493