set port powerinline priority
Use the set port powerinline priority command to configure the priority level of
powering the port.
Note:
The order in which ports in the same priority group are powered is not sequential.
Note:
Syntax
set port powerinline priority module_number/port_number priority
Parameters
Parameter
module_number
port_number
priority
User level
read-write
Context
general
Example
To set powering priority to High for ports 3/1, 3/2, and 3/3 on the G350:
G350-001(super)# set port powerinline priority 3/1-3 high
To set powering priority to High for ports 10/3, 10/4, and 10/5 on the G250:
G350-001(super)# set port powerinline priority 10/3-5 high
Related commands
set port
powerinline,
enable,
show powerinline
Description
The module number
The port number. A range of ports can be
specified. For example, to specify ports
1-3 on module 3 on the G350, use the
syntax 3/1-3. To specify ETH LAN ports
3-5 on the front panel of the G250, use the
syntax 10/3-5.
The priority level of powering the port
set port powerinline
type,
Alphabetical listing of CLI commands
set powerinline trap
disable,
Possible
Default
Values
Value
Critical,
High, Low
set powerinline trap
Issue 1.1 June 2005
455