Set Qos Rsvp - Avaya G250 Reference

CLI Commands

set qos rsvp

Use the set qos rsvp command to set the current values for the RSVP parameters of the
VoIP engines. The parameters that can be set are enabled or disabled, refresh rate in seconds,
failure retry yes or no, and service profile, guaranteed-service or controlled load service.
Note:
The set qos rsvp command will not take effect unless QoS source setup is
Note:
local.
Syntax
set qos rsvp {enable | disable} | {refresh secs} | {failure {retry |
noretry}} | {profile {guaranteed | controlled}}
Parameters
Parameter
enable
disable
refresh
secs
retry
noretry
guaranteed
controlled
User level
read-write
Context
general
474 Avaya G250 and Avaya G350 CLI Reference
Description
The refresh time in seconds
Possible Default
Values Value
1-99 15