Parameters
Parameter
protocol
User level
read-write
Context
Router: ospf
Example
To redistribute static routing information into OSPF:
G350-001(router:ospf)# redistribute static
Related commands - OSPF
area,
default-metric
Related commands - Route redistribution
default-metric (interface route metric value)
release dhcp
Use the release dhcp command to release a DHCP lease for an interface. This effectively
releases the client IP address on the specified interface.
Note:
If you are releasing a dynamic IP address with DNS information (DNS servers
Note:
list), the DNS information is removed as well, and the DNS Resolver application
will not use it any more.
Syntax
release dhcp interface-type interface-identifier
Description
The protocol to be used
(OSPF),
network
(OSPF), passive-interface,
Alphabetical listing of CLI commands
Possible Values
static, connected, rip
timers spf
Issue 1.1 June 2005
Default
Value
363