Set Boot Bank - Avaya G250 Reference

CLI Commands

set boot bank

Use the set boot bank command to set the system boot bank for the active Supervisor
Module.
Syntax
set boot bank value
Parameters
Parameter
value
User level
read-write
Context
general
Example
To specify that the media gateway boots from boot bank A:
G350-001(super)# set boot bank bank-A
boot bank set to bank-A
Related commands
copy ftp EW_archive,
EW_archive, copy tftp
bank, show download software
394 Avaya G250 and Avaya G350 CLI Reference
Description
Boot bank name
copy ftp module, copy ftp
module, copy tftp SW_imageA,
status, show image version
Possible Values
bank-a - set the
boot bank to A
bank-b - set the
boot bank to B
SW_imageA, copy ftp
copy tftp SW_imageB, dir,
Default
Value
SW_imageB, copy tftp
show boot