User level
read-write
Context
Interface: Controller (T1)
Example
To set the transmit value for the cable to 399ft:
G350-001(controller:5/1)# cablelength short 399ft
Related commands
cablelength
long, channel-group,
address,
linecode
capture buffer-mode
Use the capture buffer-mode command to specify the type of buffer used by the packet
sniffer.
Syntax
capture buffer-mode {non_cyclic | cyclic}
Parameters
Parameter
non_cyclic
cyclic
User level
read-write
Context
general
clock
source, controller, ds-mode, framing,
(E1),
linecode
(T1), remote,
Description
Linear buffer that is used until it is filled up
Circular buffer that overwrites the oldest
records when it is filled up. Use a cyclic
buffer to store the most recent history of
packet activity.
Alphabetical listing of CLI commands
show controllers
interface
serial,
Possible
Default
Values
Value
Issue 1.1 June 2005
ip
55