Name - Avaya G250 Reference

name

Use the name command to assign a name to the specified list or operation. Use the no form of
the command to return the name to the default value.
Syntax
[no] name name
Parameters
Parameter
name
User level
read-write
Context
dhcp pool, dhcp pool vendor specific, dhcp pool option, ip qos-list, ip qos-list dscp-table, ip
qos-list composite-operation, ip access-control-list, ip next-hop-list, ip capture-list, ip pbr-list, ip
crypto-list.
Example
To specify the name of access control list 330 as "Admin13":
G350-001(ACL 330)# name Admin13
Related commands - DHCP server
bootfile, client-identifier, default-router, dns-server, domain-name, end-ip-addr, lease,
next-server, option, server-name,
vendor-specific-option
Related commands - Packet sniffing
capture buffer-mode,
max-frame-size,
capture-list, show
Description
The name of the list or operation.
Note: If you wish to include spaces in the
description, you must enclose the string in
quotation marks ("").
show ip
capture buffer-size,
capture start, capture
capture, show capture-buffer hex
Alphabetical listing of CLI commands
dhcp-pool, start-ip-addr, subnet-mask, value,
capture filter-group,
stop, capture-service,
Possible Values
String of 1-31
characters
capture interface, capture
clear capture-buffer, ip
Issue 1.1 June 2005
Default
Value
329