Interface Vlan - Avaya G250 Reference

CLI Commands

interface vlan

Use the interface vlan command to enter Interface VLAN configuration mode. Use the no
form of this command to delete the interface.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface vlan vlan_id[.ip_interface]
Parameters
Parameter
vlan_id
ip_interface
User level
read-write
Context
general
Example
To create VLAN 2 and enter its configuration context:
G350-001(super)# interface Vlan 2
To create a sub interface 1 on VLAN 2:
G350-001(if:Vlan 2)# interface Vlan 2.1
To delete sub interface 1 of VLAN 2:
G350-001(super)# no interface Vlan 2.1
Related commands - IP interface configuration
description (interface),
serial, interface
load-interval, show ip interface brief
218 Avaya G250 and Avaya G350 CLI Reference
Description
The VLAN ID number of this interface
The IP sub-interface number within this
interface. A number of IP interfaces may be
bound to a Layer 3 interface.
interface Console,
tunnel, interface usb,
interface FastEthernet,
ip address, ip admin-state,
Possible Default
Values Value
1-3071
0-1024
interface Loopback, interface
ip broadcast-address,