Voip-Queue - Avaya G250 Reference

CLI Commands
User level
read-write
Context
dhcp pool
Example
To set:
G350-001(DHCP 5)# vendor-specific-option 1
Related commands
bootfile, client-identifier, default-router, dns-server, domain-name, end-ip-addr, lease, name,
next-server, option, server-name,

voip-queue

Use the voip-queue command to select custom queueing for VoIP traffic. By default, VoIP
queuing is off, and Weighted Fair VoIP Queuing (WFVQ) is enabled on all Serial interfaces and
all Fast Ethernet interfaces for which traffic-shaping is enabled. If you disable custom queueing
by using the no form of the voip-queue command, WFVQ is re-enabled.
Syntax
[no] voip-queue
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3)
Note:
This command is also used in FastEthernet context when traffic shaping is
Note:
configured.
Example
To enable VoIP queuing:
G350-001(if:Serial 2/1:1)# voip-queue
796 Avaya G250 and Avaya G350 CLI Reference
show ip dhcp-pool, start-ip-addr, subnet-mask, value