Set Date-Format; Set Dial-Pattern - Avaya G250 Reference

set date-format

Use the set date-format command to set a date format for the SLS data set on the G250.
The default date format is mm/dd/yy.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
set date format {mm/dd/yy | dd/mm/yy | yy/mm/dd}
User level
read-write
Context
You must be in the survivable-call-engine context before the set date format command will
work.
Example
G250-001(super-survivable-call-engine)# set date-format dd/mm/yy
Date Format is dd/mm/yy
Related commands
add trunk-group,
trunk-group, remove
extension-password,
trunk-group, show
ip-codec-set, show
show trunk-group,

set dial-pattern

Use the set dial-pattern command to configure up to 15 dial patterns in the SLS data set
on the G250.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
clear ars-fac, clear survivable-config,
trunk-group, save
set ip-codec-set, set
ars-fac, show date-format,
last-pim-update, show
survivable-call-engine
Alphabetical listing of CLI commands
clear dial-pattern,
config, set ars-fac, set
max-ip-registrations,
show dial-pattern,
max-ip-registrations,
clear extension,
dial-pattern, set extension,
set survivable-call-engine,
show extension, show
show survivable-call-engine,
Issue 1.1 June 2005
clear
set
set
397