show port flowcontrol
Use the show port flowcontrol command to display port flow control information. If no
port is specified, information for all ports is displayed.
Syntax
show port flowcontrol [module[/port]
Parameters
Parameter
module
port
User level
read-only
Context
general
Example
To display flowcontrol information for port 4 of module 3 on the G350:
G350-101(super)# show port flowcontrol 3/4
Port
Send-Flowcontrol Receive-Flowcontrol
Admin Oper
------ ----- ----
3/4
off
To display flowcontrol information for the front panel of the G250:
G250-101(super)# show port flowcontrol 10/4
Port
Send-Flowcontrol Receive-Flowcontrol
Admin Oper
------ ----- ----
10/4
off
Description
Number of the module
Number of the port on the module
Admin Oper
----- ----
off
off
Admin Oper
----- ----
off
off
Alphabetical listing of CLI commands
off
off
Possible
Default
Values
Value
Issue 1.1 June 2005
665