Timeout Absolute - Avaya G250 Reference

Examples
To specify that for list 5, the state will change from down to up if 4 or more hosts are up:
G350-001(config-track list 5)# threshold count up 4
To specify that for list 5, the state will change from up to down if 2 or less hosts are up:
G350-001(config-track list 5)# threshold count down 2
Related commands
description (object

timeout absolute

Use the timeout absolute command to set the number of minutes until the system
automatically disconnects an idle PPP incoming session.
Syntax
timeout absolute time
Parameters
Parameter
time
User level
read-write
Context
Interface: Console, USB
Example
To set the PPP timeout to 30 minutes:
G350-001(if:Console)# timeout absolute 30
PPP incoming session will automatically disconnect after 30 minutes of
idle time.
Related commands
async mode interactive,
port), ip address,
(PPP)
tracking), object, track,
Description
Interval, in minutes, after which the system
automatically disconnects the PPP session. An interval
of 0 minutes indicates that no timeout should occur.
async mode
ppp authentication,
show track
terminal, async modem-type,
shutdown (interface),
Alphabetical listing of CLI commands
Possible
Values
0-999
async reset-modem (USB
shutdown (USB modem),
Issue 1.1 June 2005
Default
Value
0
speed
773