Fair-Voip-Queue - Avaya G250 Reference

CLI Commands
Parameters
Parameter
size
User level
admin
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured
Example
G350-001(super-if:FastEthernet 10/2)# fair-queue-limit 500
Related commands - WFVQ
fair-voip-queue, voip-queue,

fair-voip-queue

Use the fair-voip-queue command to enable Weighted Fair VoIP Queuing (WFVQ) on the
current interface. WFVQ provides more fair service for data packets, and improves response
time for interactive data applications (such as Telnet). WFVQ is the default queuing mode for all
Serial interfaces and all Fast Ethernet interfaces for which traffic-shaping is enabled. To disable
WFVQ, you must enable another queuing mode, using either the voip-queue or the
priority-queue command in interface context.
Note:
The commands fair-voip-queue and voip-queue are mutually exclusive,
Note:
and cannot both appear in a configuration script.
Syntax
fair-voip-queue
User level
admin
188 Avaya G250 and Avaya G350 CLI Reference
Description
The maximum number of packets that can
be queued in the weighted fair queue
voip-queue-delay
Possible Default
Values Value