Parameters
Parameter
string
User level
read-write
Context
general
Examples
To set the descriptive name of the system to "G350-HQ":
G350-001(super)# set system name "G350-HQ"
*** Set system name ***
system name set
Related commands
set system
contact,
set terminal recovery password
Use the set terminal recovery password command to enable or disable the recovery
password.
Note:
This command can only be issued via the console port (not via a modem port).
Note:
Syntax
set terminal recovery password action
Parameters
Parameter
action
Description
The system name string should be typed inside quotes.
The name is cleared if you leave this field blank.
set system location
Description
The state of the recovery password
Alphabetical listing of CLI commands
Possible
Values
Possible Values
Default
Value
enable, disable
Issue 1.1 June 2005
Default
Value
503