Set Port Spantree Force-Protocol-Migration - Avaya G250 Reference

CLI Commands
Example
To set the spanning tree cost of port 4/2 to 4096:
G350-147# set port spantree cost 4/2 4096
port 4/2 spantree cost is 4096
Related commands
set port spantree,
spantree default-path-cost,
spantree hello-time,
spantree version,

set port spantree force-protocol-migration

Use the set port spantree force-protocol-migration command to force the port to
send a rapid spanning tree hello packet (Bridge Protocol Data Unit).
Note:
This command is not supported by the G250.
Note:
Syntax
set port spantree force-protocol-migration module/port
Parameters
Parameter
module
port
User level
read-write
Context
general
Example
To force port 2 of module 10 to send a hello packet:
G350-001(super)# set port spantree force-protocol-migration 10/2
462 Avaya G250 and Avaya G350 CLI Reference
set port spantree force-protocol-migration,
set spantree
set spantree max-age,
show spantree
Description
The module number
The port number
set port spantree
enable/disable, set spantree
set spantree priority,
priority,
forward-delay, set
set spantree tx-hold-count,
Possible Default
Values Value
set
set