CLI Commands
ping
Use the ping command to send ICMP packets to a target system. The ping command is useful
for checking host reachability and network connectivity.
Syntax
ping host [interval [size[timeout[source_address]]]]
Parameters
Parameter
host
interval
size
timeout
source_address
User level
read-only
Context
general
Example
To send test 50-byte packets to IP address 192.168.49.1 from IP address 192.168.49.4 every
three seconds, timing out after five seconds:
G350-001(super)# ping 192.168.49.1 3 50 5 192.168.49.4
344 Avaya G250 and Avaya G350 CLI Reference
Description
The IP address of the target system
The number of seconds between
successive ICMP packets
The size, in bytes, of the packet sent when
pinging
The timeout in seconds
IP address from which to send the ICMP
packets
Possible
Default
Values
Value
1-256
1
22-65500
50
1-10