Keepalive-Icmp Timeout - Avaya G250 Reference

keepalive-icmp timeout

Use the keepalive-icmp timeout command to set the timeout (in seconds) for receiving
the keepalive response. Using this command without a parameter resets the timeout value to
the default value.
Syntax
keepalive-icmp timeout timeout
Parameters
Parameter
timeout
User level
read-write
Context
Interface: FastEthernet
Example
G350-001(if:FastEthernet 10/2)# keepalive-icmp timeout 1
Related commands
keepalive-icmp,
source-address,
Description
The number of seconds to wait for a
response
keepalive-icmp failure-retries,
keepalive-icmp success-retries,
Alphabetical listing of CLI commands
Possible
Values
1-10
keepalive-icmp interval,
show keepalive-icmp
Default
Value
1
keepalive-icmp
Issue 1.1 June 2005 313