Local-Address - Avaya G250 Reference

Related commands
description (interface),
serial, interface
broadcast-address,

local-address

Use the local-address command to set the local IP address for the IPSec tunnels derived
from this crypto-list. Use the no form of the command to delete the local IP address.
Note:
You must configure a local address before activating a list.
Note:
Note:
You cannot change or delete the local address of an active list.
Note:
Syntax
[no] local-address {ip-interface-address | ip-interface--id}
Parameters
Parameter
ip-interface-address
ip-interface-name-id
User level
read-write
Context
ip crypto-list
Examples
G350-001(crypto 901)# local-address 192.168.49.1
G350-001(crypto 901)# local-address FastEthernet 10/2.0
G350-001(crypto 901)# local-address Serial 2/1:10
interface Console,
tunnel, interface usb,
show ip interface brief
interface FastEthernet,
interface vlan, ip address,
Description
The IP address of an IP
interface of the device
The name of an IP
interface of the device
Alphabetical listing of CLI commands
interface Loopback,
ip admin-state, ip
Possible Default
Values Value
Issue 1.1 June 2005
interface
323