Channel-Group - Avaya G250 Reference

CLI Commands
Related commands
capture buffer-mode,
max-frame-size,
show capture,

channel-group

Use the channel-group command to create a channel group logical interface for a PPP or
Frame Relay session. Use the no form of the command to delete a channel group.
Note:
If you issue this command with an existing channel number, the timeslots you
Note:
specify will replace any that already exist.
Note:
The G250 only supports one channel group per interface.
Note:
Syntax
channel-group channel_number timeslots ts_list speed speed_value
no channel-group channel_number
Parameters
Parameter
channel_
number
ts_list
speed_value
User level
read-write
Context
Interface: Controller
62 Avaya G250 and Avaya G350 CLI Reference
capture buffer-size,
capture start, capture
show capture-buffer hex
Description
The ID number to identify the channel
group
The time slots to include in this channel
group. Values can be separated either by
a "–" for a range, or by commas for a list.
The acceptable speed values
capture filter-group,
stop, clear capture-buffer,
capture interface, capture
ip capture-list, name,
Possible
Values
For T1: 0-23
For E1: 0-30
For T1: 1-24
For E1: 1-31
56, 64
Default
Value
56