Parameters
Parameter
line
internal
User level
read-write
Context
Interface: Controller
Example
To specify that controller number 5 uses an external clock:
G350-001(controller:5/1)# clock source external
Related commands
cablelength
long,
serial,
ip
address,
cna-testplug
The G250/G350 features one CNA test plug, which has its own CNA configuration context. Use
the cna-testplug command to enter the CNA test plug configuration context.
Syntax
cna-testplug 1
User level
read-write
Context
general
Description
Keyword that specifies to use an external
clock
Keyword that specifies to synchronize to the
internal clock
cablelength
short, channel-group, controller, ds-mode, framing,
linecode
(E1),
linecode
Alphabetical listing of CLI commands
(T1), remote,
show controllers
Possible
Default
Values
Value
interface
Issue 1.1 June 2005
97