Router Ospf; Router Rip - Avaya G250 Reference

router ospf

Use the router ospf command to enable OSPF protocol on the system and to enter the
router configuration context. Use the no form of this command to restore the default value, and
disable OSPF globally.
Syntax
[no] router ospf
User level
read-write
Context
general
Related commands
ip ospf authentication,
hello-interval, ip ospf
ospf router-id, show ip
neighbor, show ip protocols

router rip

Use the router rip command to enable the RIP and to enter the router configuration
context. Use the no form of this command to restore the default value, and disable RIP.
Syntax
[no] router rip
User level
read-write
Context
general
Related commands
ip distribution access-list,
default-route-mode,
split-horizon, show ip protocols
ip ospf authentication-key,
message-digest-key,
ospf, show ip ospf database,
ip rip authentication
ip rip poison-reverse,
Alphabetical listing of CLI commands
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
show ip ospf
key, ip rip authentication
ip rip rip-version, ip rip
dead-interval, ip ospf
ip ospf priority,
interface, show ip ospf
mode, ip rip
send-receive-mode, ip rip
Issue 1.1 June 2005
ip
373