show spantree
Use the show spantree command to display spanning-tree information. If no port is specified,
information for all ports is displayed.
Note:
This command is not supported by the G250.
Note:
Syntax
show spantree [module[/port]]
Parameters
Parameter
module
port
User level
read-only
Context
general
Example
To display spanning tree information for all ports:
G350-001(super)# show spantree
Spanning tree enabled
Designated Root:
Designated Root Priority: 32768
Designated Root Cost: 20
Designated Root Port: 1/1
Root Max Age: 20
Bridge ID MAC ADDR: 00-40-0d-92-04-b4
Bridge ID priority: 32768
Port
State
------ ------------- ---------- ------------
4 /1
Forwarding
4 /2
not-connected 20
4 /3
LAG-member
Description
Number of the module
Number of the port on the module
00-40-0d-88-06-c8
Hello Time: 2
Cost
20
20
Alphabetical listing of CLI commands
Possible Values
Priority
128
128
128
Default Value
Issue 1.1 June 2005
711