Ip Snmp-Server - Avaya G250 Reference

Example
To simulate the effects of applying access control list 330 to a packet entering the media
gateway through the Fast Ethernet interface, from IP address 192.67.85.12 to IP address
192.67.54.25:
G350-001(if:FastEthernet 10/2)# ip simulate 330 in 192.67.85.12
192.67.54.25 ip
Related commands
ip access-control-list,
pre-classification,

ip snmp-server

Use the ip snmp-server command to enable the SNMP agent for the G350. Use the no form
of the command to disable the SNMP agent for the G350. Disabling the SNMP agent also
blocks SNMP traps. However, users can change SNMP configuration settings even when the
agent is disabled.
Syntax
ip snmp-server [volatile]
no ip snmp-server
Parameters
Parameter
volatile
User level
admin
Context
general
Example
G350-001(ACL 330)(super)# ip snmp-server volatile
ip access-group, ip
show ip access-control-list,
Description
Specifies that the SNMP agent is only
enabled temporarily, until the system is
reset
Alphabetical listing of CLI commands
policy-list-copy, ip qos-group,
show ip qos-list
ip qos-list,
Possible Default
Values Value
Issue 1.1 June 2005 287