Icmp In-Echo-Limit - Avaya G250 Reference

CLI Commands
Related commands - Policy-based routing
destination-ip,
capture-list, source-ip,
source-port
Related commands - Policy
composite-operation, cookie, destination-ip,
dscp-table, icmp,
composite-operation,
tcp established,

icmp in-echo-limit

Use the icmp in-echo-limit command to set the maximum number of echo requests that
can be received in one second. Use the no form of the command to the limit to its default value.
Syntax
icmp in-echo-limit size
Parameters
Parameter
size
User level
read-write
Context
general
Example
To set the echo request limit at 500 packets per second:
G350-001(super)# icmp in-echo-limit 500
208 Avaya G250 and Avaya G350 CLI Reference
dscp (policy, policy-based routing, packet
tcp destination-port,
ip-rule (policy, policy-based routing, packet
show dscp-table,
tcp source-port, udp
Description
The number of echo requests
sniffing), ip-protocol,
tcp source-port,
dscp (policy, policy-based routing, packet
show ip-rule, show
destination-port, udp source-port
show ip
udp destination-port,
sniffing), owner, show
list, source-ip, tcp destination-port,
Possible Default
Values Value
1-10000
udp
sniffing),