Show Trunk-Group - Avaya G250 Reference

show trunk-group

Use the show trunk-group command to display trunk group administration in the SLS data
on the G250.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Syntax
show trunk-group
User level
read-write
Context
You must be in the survivable-call-engine context before the show trunk-group command
will work.
Example
G250-001(super-survivable-call-engine)# show trunk-group
Trunk Group
-----------
13
33
Output fields
Field
Trunk Group
Ports
Tac
Dial
Type
Ports Tac
----- ---
v301, v304 9139
v303
Description
The trunk group number (1-2000).
The G250 module ports that are administered on this
trunk group.
The trunk access code (1 to 4 digits).
The dial type (either rotary or dtmf).
The trunk type (optional): loop-start.
Alphabetical listing of CLI commands
Dial Type
---- ----
rotary loop-start
dtmf loop-start
Issue 1.1 June 2005 725