Set Port Static-Vlan - Avaya G250 Reference

Example
To configure port 1 on module 4 to 100 Mbps
G350-147# set port speed 4/1 100MB
Port 4/1 speed set to 100 Mbps.
Related commands
set port auto-negotiation-flowcontrol-advertisement,
edge admin state,
negotiation, set port point-to-point admin
auto-negotiation-flowcontrol-advertisement,

set port static-vlan

Use the set port static-vlan command to assign a static VLAN to a port.
Syntax
set port static-vlan module/port vlan_num
Parameters
Parameter
module
port
vlan_num
User level
read-write
Context
general
set port enable, set port
Description
The module number
The port or range of ports which are being
bound
VLAN to bind to the port
Alphabetical listing of CLI commands
set port disable,
flowcontrol, set port
status, show port
show port edge state,
set port duplex,
level, set port name, set port
show port flowcontrol
Possible Default
Values Value
Issue 1.1 June 2005
set port
465