Arp - Avaya G250 Reference

arp

Use the arp command to add a permanent entry to the Address Resolution Protocol (ARP)
cache. Use the no form of this command to remove either a static entry or a dynamically
learned entry from the ARP cache.
Syntax
arp ip_address mac_address
no arp ip_address
Parameters
Parameter
ip_address
mac_address
User level
read-write
Context
general
Example
To add a permanent entry for station 192.168.7.8 to the ARP cache:
G350-001(super)# arp 192.168.7.8 00:40:0d:8c:2a:01
To remove an entry from the ARP cache for the station 192.168.13.76:
G350-001(super)# no arp 192.168.13.76
Related commands
arp timeout, clear
Description
IP address of the station
Corresponding MAC address for this
station
arp-cache, ip max-arp-entries,
Alphabetical listing of CLI commands
Possible
Values
ip proxy-arp, show ip
Default
Value
arp, show ip reverse-arp
Issue 1.1 June 2005 39