Voip-Queue-Delay - Avaya G250 Reference

Related commands
fair-queue-limit, fair-voip-queue, voip-queue,

voip-queue-delay

Use the voip-queue-delay command to set the maximum query delay for which to
estimate.
Syntax
voip-queue-delay queue_delay_ms
Parameters
Parameter
queue_delay_ms
User level
admin
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3)
Note:
This command is also used in Serial and WAN FastEthernet context when traffic
Note:
shaping is configured.
Example
To set the maximum query delay to 30 milliseconds:
G350-001(super)# voip-queue-delay 30
Related commands - QoS
interface FastEthernet,
signal, show ip
Related commands - WFVQ
fair-queue-limit, fair-voip-queue,
Description
The maximum amount of time that voice
traffic is allowed to wait in the queue
interface serial, queue-limit,
qos-list, show queue,
voip-queue-delay
voip-queue-delay
set qos
show voip-parameters,
Alphabetical listing of CLI commands
Possible
Values
1-1000
bearer, set qos control,
voip-queue-delay
Issue 1.1 June 2005
Default
Value
set qos
797