Summary Of Snmp Trap Configuration Commands - Avaya G450 Manual

link-faults. ITC proprietary link down notifications
●
supply. Main and backup power supply notifications
●

Summary of SNMP trap configuration commands

For more information about these commands, see Avaya G450 CLI Reference, 03-300437.
Table 87: SNMP trap configuration CLI commands
Root level command
interface
(console|dialer|
fastethernet|
serial|tunnel|
usb-modem)
set port trap
set snmp trap
enable | disable
auth
set snmp trap
enable | disable
frame-relay
show port trap
show snmp
snmp-server
enable
notifications
Command
snmp trap
link-status
Configuring SNMP traps
Description
Enter the context of the Console,
Dialer, Fast Ethernet, Serial,
Tunnel, or USB-modem interface
Enable or disable Link Up and Link Down
traps on an interface
Enable or disable SNMP Link Up and
Link Down traps notifications and traps
on a port
Enable or disable authentication failure
traps for all managers
Enable or disable frame relay traps for all
managers
Display information on SNMP generic
Link Up and Link Down traps sent for a
specific port or for all ports
Display SNMP configuration information
Enable or disable the sending of all traps
and notifications from the G450
Issue 1 January 2008
1 of 2
335