CLI Commands
Parameters
Parameter
seconds
User level
read-write
Context
general
Example
G350-001(super)# crypto isakmp nat keepalive 60
Related commands
crypto ipsec nat-transparency
crypto isakmp peer
Use the crypto isakmp peer command to enter the crypto ISAKMP peer context and
create or edit an ISAKMP peer. Use the no form of the command to delete a remote VPN peer.
Note:
You cannot delete an ISAKMP peer that is referenced by a crypto map; you must
Note:
first delete the peer from the crypto map by entering crypto map context using the
crypto map command, and then delete the peer using the no set peer
command.
Syntax
[no] crypto isakmp peer {address peer-address | fqdn fqdn-str}
142 Avaya G250 and Avaya G350 CLI Reference
Description
The number of seconds between NAT
Traversal keepalive messages
udp-encapsulation,
Possible
Values
5-3600
ip crypto-group
Default
Value