Pmi; Ppp Authentication - Avaya G250 Reference

pmi

Use the pmi command to define this interface as the Primary Management Interface for the
system.
Syntax
pmi
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3, USP
PPP L3, USP PPP L2-L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3), Loopback (L2-L3, L3),
Tunnel (L2-L3, L3)
Example
To define the VLAN 1 interface as the Primary Management Interface:
G350-001(super)# interface vlan 1
G350-001(super-if:Vlan 1)# pmi
Related commands
show pmi

ppp authentication

Use the ppp authentication command to select the authentication method used when
closing a PPP server or client session.
Note:
The value set for ppp authentication, affects both the USB interface and the
Note:
Console interface, simultaneously.
Syntax
ppp authentication {pap|chap|none}
Alphabetical listing of CLI commands
Issue 1.1 June 2005 345