Default-Router - Avaya G250 Reference

CLI Commands
Parameters
Parameter
number
User level
read-write
Context
Interface: Loopback (L2-L3, L3), Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3,
DS1 FR-SUB L3, USP PPP L2-L3, USP PPP L3), Fast Ethernet (L3, L2-L3), VLAN (L2-L3, L3),
Tunnel (L2-L3, L3)
Example
To set the default metric to 10:
G350-001(if:FastEthernet 10/2)# default-metric 10

default-router

Use the default-router command to set up to eight default router IP addresses in order of
preference. Use the no form of this command to clear the default router IP address(es).
Syntax
[no] default-router ip-addr-list
Parameters
Parameter
ip-addr-list
User level
read-write
Context
dhcp pool
152 Avaya G250 and Avaya G350 CLI Reference
Description
The interface route metric value
Description
A list of up to eight IP
addresses for the default router.
Possible
Values
1-15
Possible Values
A list of IP addresses
separated by spaces
Default
Value
1
Default Value
0.0.0.0