Frame-Relay Lmi-Type - Avaya G250 Reference

frame-relay lmi-type

Use the frame-relay lmi-type command to manually define the type of the Local
Management Interface (LMI) to use.
Use the no form of this command to specify automatic detection of the LMI type (auto-sensing).
If auto-sense fails, ANSI is used as the default.
Syntax
[no] frame-relay lmi-type lmi_type
Parameters
Parameter
lmi_type
User level
read-write
Context
Interface: Serial (DS1 FR L2, USP FR L2)
Example
To select the q933a LMI type:
G350-001(if:Serial 2/1:1)# frame-relay lmi-type q933a
Related commands
encapsulation,
frame-relay lmi-n393dte,
Description
The type of local
management
interface
frame-relay interface-dlci,
frame-relay
Possible Values
ansi - LMI according to ANSI T1.617 [9]
q933a - LMI according to ITU-T Q.933 [7]
autosense
lmi-rev1
disable
frame-relay lmi-n391dte,
priority-dlci-group, frame-relay
Alphabetical listing of CLI commands
frame-relay lmi-n392dte,
traffic-shaping,
Issue 1.1 June 2005
Default
Value
ip address
199