Linecode (E1) - Avaya G250 Reference

CLI Commands
User level
admin
Context
banner login, banner post-login
Example
To specify text for the third line of the banner displayed after a successful login:
G350-001(super-banner-post-login)# line 3 "Welcome to the G350 Media
Gateway CLI Interface"
Related commands
banner login, banner
post-login, terminal

linecode (E1)

Use the linecode command to specify the type of line-code transmission for the an E1 line.
Use the no form of the command to restore the default line-code value of hbd3.
Note:
Normally the E1 service provider determines which type of line-code is required
Note:
for your E1 circuit.
Syntax
linecode {ami|hdb3}
Parameters
Parameter
ami
hbd3
User level
read-write
320 Avaya G250 and Avaya G350 CLI Reference
post-login, clear screen, hostname,
length, terminal width
Description
Keyword that specifies the Alternate Mode
Inversion line-code type
Keyword that specifies the High-Density
Bipolar 3 line-code type
show banner login, show banner
Possible
Values
Default
Value