CLI Commands
async reset-modem (Console port)
Use the async reset-modem command to reset the connected modem.
Syntax
async reset-modem
User level
read-write
Context
Interface: Console
Related commands
async mode
interactive,
authentication,
async reset-modem (USB port)
Use the async reset-modem command to reset the USB modem. This command resets the
PPP stack, deactivates the DTR signal, issues an ATZ (reset) command to the USB modem,
and reissues the Init string sequence.
You can perform this command from within an active PPP session to close the session and
allow the USB modem to accept a new call.
Note:
This command is not supported by the G250.
Note:
Syntax
async reset-modem
User level
read-write
Context
Interface: USB
44 Avaya G250 and Avaya G350 CLI Reference
async mode
shutdown
(interface),
terminal,
async
modem-type,
speed
(PPP),
timeout absolute
ip
address,
ppp