Related commands
idle-character,
banner login
Use the banner login command to enter the login banner configuration mode. Use the no
form of this command to set the login banner to its default value. The login banner displays
before the user is prompted for the login name. To enter text for the login banner, refer to the
command
line
on page 319.
Note:
Before creating a new banner, delete the current banner using the no banner
Note:
login command.
Syntax
[no] banner login
User level
admin
Context
general
Example
To enter login banner configuration mode:
G350-001(super)# banner login
G350-001(super-login)#
Related commands
banner
post-login,
terminal
length,
banner post-login
Use the banner post-login command to enter the post-login banner configuration mode.
The post-login banner displays after the user has logged in successfully. Use the no form of this
command to set the post-login banner to its default value. To enter text for the post-login
banner, refer to the command
ignore
dcd,
interface
serial,
clear
screen, hostname, line,
terminal width
line
on page 319.
Alphabetical listing of CLI commands
invert
txclock, nrzi-encoding,
show banner
login,
transmitter-delay
show banner
post-login,
Issue 1.1 June 2005
49