Show Mm - Avaya G250 Reference

-- Not Available --
The following example shows output for the show mgc list command in the G250:
G250-001(super)# show mgc list
CONFIGURED MGC HOST
---------------------
135.8.48.220
135.34.54.2
149.49.70.230
-- Not Available --
survivable-call-engine
Output fields
Field
CONFIGURED MGC
HOST
Related commands
clear mgc list, session,
icc-monitoring,

show mm

Use the show mm command to show the media gateway Media Module information. It displays
the types and serial numbers of Media Modules installed on the media gateway.
If no Media Module ID is specified, information for all Media Modules is displayed.
Syntax
show mm [mmID]
Description
Lists five administered elements:
The first three are the IP addresses of the
next-available call controller in the administered list.
The fourth element (--Not Available--) is not used
on the G250.
The fifth element is either:
- survivable-call-engine — SLS is enabled.
- survivable-call-engine disabled — SLS is disabled.
set icc-monitoring,
show mediaserver, show mgc
Alphabetical listing of CLI commands
set mediaserver, set mgc list, set reset-times, show
Issue 1.1 June 2005 653