Show Lldp Config - Avaya G250 Reference

CLI Commands
Name
Port description
System name
System
description
SysCaps
Management
Address
PVID
Static VLANs
Related commands
set lldp re-init-delay,
tx-interval, set port
vlan-name config

show lldp config

Use the show lldp config command to display the global LLDP configuration.
Syntax
show lldp config
User level
read-only
Context
General
Example
G250-001(super)# show lldp config
642 Avaya G250 and Avaya G350 CLI Reference
Description
The value of Port Description TLV received on the port.
The value of System Name TLV received on the port.
The value of System Description TLV received on the port.
Displays which capabilities the remote LLDP agent supports, and
which are enabled. This information is based on the values in the
System Capabilities TLV received on the port.
The Management Address of the remote agent connected to that
port, according to the Management Address TLV received on the
port.
The PVID value of the remote agent connected to that port,
according to the Port-VLAN-ID TLV received on that port.
A list of VLANs that the remote LLDP agent advertises as VLANs
that are statically bound to its port. This information is based on the
values in the VLAN Name TLV received on that port.
set lldp system-control,
lldp, set port lldp tlv, show lldp
set lldp tx-delay, set lldp
config, show port lldp
tx-hold-multiplier, set lldp
config, show port lldp