Ip Netbios-Rebroadcast - Avaya G250 Reference

CLI Commands

ip netbios-rebroadcast

Use the ip netbios-rebroadcast command to enable the forwarding of NETBIOS packets
on an interface. If no value is provided for direction, the both option is applied as the default
value.
Use the no form of this command to disable forwarding of NETBIOS packets on an interface.
Syntax
ip netbios-rebroadcast [direction]
no ip netbios-rebroadcast
Parameters
Parameter
direction
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3, USP
PPP L3, USP PPP L2-L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
Example
To enable rebroadcasting of NETBIOS packets received by and sent from the FastEthernet
interface:
G350-001(if:FastEthernet 10/2)# ip netbios-rebroadcast both
Related commands
interface FastEthernet,
254 Avaya G250 and Avaya G350 CLI Reference
Description
The NETBIOS
rebroadcasts mode
interface serial, interface
Possible Values
both - NETBIOS packets
received on the interface are
rebroadcast to other interfaces
and NETBIOS packets
received on other interfaces
are rebroadcast to this
interface.
disable - NETBIOS packets
are not rebroadcast in or out of
this interface.
vlan, ip directed-broadcast
Default
Value
both