Show Ip Dhcp-Client - Avaya G250 Reference

Name
Remote
peer / Group
Transform-set
DSCP
C-cnl
Related commands
clear crypto isakmp,
crypto ipsec sa,
peer-group, show crypto isakmp
active-lists

show ip dhcp-client

Use the show ip dhcp-client command to show the configuration of the DHCP client.
Syntax
show ip dhcp-client (in the context of the interface)
show ip dhcp-client {interface-type interface-identifier | brief } (in
the general context)
Parameters
Parameter
interface-type
interface-
identifier
brief
User level
read-only
Description
IP address or name of remote peer, or name of Peer Group.
The name of the transform-set to which this crypto map points.
The tunnel DSCP configuration, which can be either copy or a
decimal number in the range [0-63].
Whether IPSec continuous channel is enabled (Yes) or not (No).
clear crypto sa, clear crypto sa
show crypto ipsec transform-set,
policy,
Description
The type of interface
The interface identifier
A keyword indicating
to display the
configuration in brief
Alphabetical listing of CLI commands
counters,
show crypto isakmp
show crypto isakmp sa,
Possible Values
FastEthernet
module number/port number
ip crypto-list, ip-rule (VPN),
peer, show crypto isakmp
show crypto map, show ip
Default
Value
Issue 1.1 June 2005
show
583