Ppp Timeout Ncp - Avaya G250 Reference

CLI Commands
Related commands
encapsulation
delay, pppoe-client persistent
wait-for-ipcp, show ppp authentication

ppp timeout ncp

Use the ppp timeout ncp command to set the maximum time, in seconds, that PPP allows
for negotiation of a network layer protocol. If no network protocol is negotiated within the given
time, the connection is terminated. Use the no form of the command to disable the timeout
feature.
Syntax
[no] ppp timeout ncp seconds
Parameters
Parameter
seconds
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, USP PPP L2-L3, USP PPP L2)
Example
To specify that PPP will allow 60 seconds for negotiation of a network protocol:
G350-001(super)# ppp timeout ncp 60
Related commands
encapsulation,
352 Avaya G250 and Avaya G350 CLI Reference
pppoe, mtu, ppp chap
max-attempts,
Description
The time in seconds that PPP allows for
negotiation of a network layer protocol
ip address, keepalive
hostname, ppp chap password,
pppoe-client service-name,
(PPP), ppp timeout retry,
pppoe-client persistent
pppoe-client
Possible Default
Values Value
1-65535
show interfaces