Ip Proxy-Arp; Ip Qos-Group - Avaya G250 Reference

ip proxy-arp

Use the ip proxy-arp command to enable proxy ARP on an interface. Use the no form of
this command to disable proxy ARP on an interface.
Syntax
[no] ip proxy-arp
User level
read-write
Context
Interface: FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
Example
To disable proxy ARP on an interface:
G350-001(if:Vlan 1)# no ip proxy-arp
Related commands
arp, arp timeout,

ip qos-group

Use the ip qos-group command to activate the specified QoS list on the given interface. You
must first create the QoS list using the ip qos-list command.
Syntax
ip qos-group policy_list direction
Parameters
Parameter
policy_list
direction
clear arp-cache, ip max-arp-entries,
Description
The policy list number
The direction of packets to which the
policy applies.
Alphabetical listing of CLI commands
show ip arp, show ip reverse-arp
Possible
Values
400-499
in, out
Issue 1.1 June 2005
Default
Value
400
269