Set Spantree Version - Avaya G250 Reference

CLI Commands

set spantree version

Use the set spantree version command to set the version of the spanning tree protocol
used by the device.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree version version
Parameters
Parameter
version
User level
read-write
Context
general
Example
To use the rapid-spanning-tree version of spanning tree:
G350-101# set spantree version rapid-spanning-tree
Spanning tree version is set to rapid spanning tree.
Related commands
set port spantree,
spantree priority,
forward-delay,
tx-hold-count,
496 Avaya G250 and Avaya G350 CLI Reference
Description
Version of the
spanning tree
protocol
set port spantree
set spantree default-path-cost,
set spantree hello-time,
show spantree
Possible Values
common-spanning-tree — compatible
with IEEE802.1D standard
rapid-spanning-tree — compatible
with IEEE802.1W standard
cost, set port spantree
set spantree
set spantree max-age,
force-protocol-migration,
enable/disable, set spantree
set spantree priority,
Default
Value
set port
set spantree