Show Csu Loopbacks - Avaya G250 Reference

CLI Commands
Output fields
Name
ID
Description
Remote peer / Group
Transform-set
DSCP
C-cnl
Related commands
clear crypto isakmp,
show crypto ipsec
show crypto isakmp

show csu loopbacks

Use the show csu loopbacks command to view the state of the server SAT-controlled CSU
loopbacks on a media module.
Note:
This command is not supported by the G250.
Note:
Syntax
show csu loopbacks mmID
Parameters
Parameter
mmID
User level
read-only
542 Avaya G250 and Avaya G350 CLI Reference
Description
Crypto map ID (set using the
Crypto map description
IP address or name of remote peer, or name of Peer Group
The name of the transform-set
The DSCP configuration
Whether continuous channel is enabled (Yes) or not (No)
clear crypto sa, clear crypto sa
transform-set, show crypto isakmp
policy, show crypto isakmp
Description
The Media Module ID
crypto map command)
counters, crypto map,
peer, show crypto isakmp
sa, show ip active-lists,
Possible
Values
show crypto ipsec sa,
peer-group,
show ip crypto-list
Default
Value