show port point-to-point status
Use the show port point-to-point status command to display the point-to-point
status of the specified port. If no port is specified, information for all ports is displayed.
Note:
This command is not supported by the G250.
Note:
Syntax
show port point-to-point status [module/port]
Parameters
Parameter
module
port
User level
read-only
Context
general
Example
To display point-to-point information for all ports:
G350-001(super)# show port point-to-point status
Related commands
show port
Description
Number of the module
Number of the port on the module
Alphabetical listing of CLI commands
Possible
Default
Values
Value
Issue 1.1 June 2005
671