Set Snmp Trap - Avaya G250 Reference

Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,

set snmp trap

Use the set snmp trap command to define an SNMPv1 trap receiver, or configure its
settings.
Syntax
set snmp trap receiver {enable|disable} [categorylist]
Parameters
Parameter
receiver
enable
disable
set port trap, set snmp
snmp-server host,
Description
The IP address of the
trap receiver
Keyword specifying
that the trap receiver is
enabled
Keyword specifying
that the trap receiver is
disabled (this is the
default
Alphabetical listing of CLI commands
trap, show snmp, snmp trap
snmp-server informs
Possible Values
link-status, snmp-server
Default
Value
Issue 1.1 June 2005 487