Set Survivable-Call-Engine - Avaya G250 Reference

set survivable-call-engine

Use the set survivable-call-engine command to enable or disable SLS.
Note:
This command is supported by the Avaya G250-Analog; it is not supported on the
Note:
G250-BRI or the G350.
Note:
If you disable SLS using the set survivable-call-engine command, the
Note:
ETR function is enabled only after the G250 has registered with an entry from the
Media Gateway Controller (MGC) list.
Syntax
set survivable-call-engine {enable | disable}
Parameters
Parameter
enable
disable
User level
read-write
Context
You must be in the survivable-call-engine context before the set survivable-call-engine
command will work.
Example
G250-001(super-survivable-call-engine)# set survivable-call-engine
enable
Survivable Call Engine is enabled
Related commands
add trunk-group,
trunk-group, remove
extension, set extension-password,
show ars-fac, show
last-pim-update,
survivable-call-engine
Description
Enable SLS
Disable SLS
clear ars-fac, clear survivable-config,
trunk-group, save
set
date-format, show
show max-ip-registrations,
Alphabetical listing of CLI commands
Possible Values
clear
config, set ars-fac, set
ip-codec-set, set max-ip-registrations,
dial-pattern, show extension,
show survivable-call-engine,
Default Value
dial-pattern, clear extension,
date-format, set dial-pattern,
set trunk-group,
show ip-codec-set,
show trunk-group,
Issue 1.1 June 2005
clear
set
show
497