Copy Tftp Sw_Imagea - Avaya G250 Reference

CLI Commands

copy tftp SW_imageA

Use the copy tftp SW_imageA command to update the software image in Bank A of the
media gateway.
To use this command, you need to have an active TFTP server, and to create a file into which to
download the data. If Avaya Network Manager is running, an additional TFTP server is not
required.
Syntax
copy tftp SW_imageA filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To download the software file imgA.bin from the TFTP server 149.49.36.200 into boot bank A:
G350-001(super)# copy tftp SW_imageA c:\imgA.bin 149.49.36.200
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
Related commands
copy ftp EW_archive,
EW_archive, copy tftp
download software
134 Avaya G250 and Avaya G350 CLI Reference
Description
The file name, including the full path
IP address of the host
copy ftp module, copy ftp
module, copy tftp
status, show image version
Possible Values
SW_imageA, copy ftp
SW_imageB, dir, set boot
Default Value
SW_imageB, copy tftp
bank, show boot bank, show